This property sheet is used to set spectrum analyzer settings for a pane.
- Input - selects the (one based) input of the coax switcher to be used
- Attenuator - input attentuation of the spectrum analyzer (normally 0 dB)
- Frequency
- Start - lower frequency bound of the frequency sweep
- Stop - upper frequency bound of the frequency sweep
- Resolution
- Detector - bandwidth of the filter used for detection
- Video - bandwidth of the post-detector visual filter
- Sweep
- Count - number of sweeps to perform. Single sweep uses peak detection, multiple sweeps use video averaging
- Total time - indicates the total time necessary to acquire the measurement
- Amplitude
- Minimum - lower amplitude bound of the displayed sweep
- Maximum - upper amplitude bound of the displayed sweep